| Features: Chaise |
 |
|
 |
| |
Commercial outdoor furniture can be subject to years of high traffic. BROWN JORDAN furniture is designed and built specifically to withstand heavy commercial use. We’ve added special features for strength, durability, comfort, safety and convenience.
Features
|
| 1. |
Rich, 3 mil thick powder coat finish provides deep color with unsurpassed durability |
| 2. |
Heavy-guage tubular aluminum assures rugged frame construction |
| 3. |
Heli-arc, full circumference weld construction for strong joining of parts |
| 4. |
Welded joints are ground and buffed smooth |
| 5. |
Super-tough nylon glides provide years of frame and deck protection |
| 6. |
7/8" round bridge-style stretchers for added strength |
| 7. |
Two-inch wide virgin vinyl straps, individually double wrapped with aluminum rivets, provide excellent comfort and durability |
| 8. |
Fabric mesh sling options provide firm yet stylish back and seating surfaces. More than 30 mesh colors are available |
| |
|
|
|
 |
| 9. |
100% solution dyed acrylic Versatex® mesh is light- weight, non-allergenic, dries quickly, is washable, and draws moisture away to prevent rotting or shrinking |
| 10. |
Vinyl straps and fabrics contain special UV protective stabilizers that ensure lasting use |
| 11. |
Fabrics are tested to more than 2000 hours of UV stability without visible color change due to long term sun exposture |
| 12. |
Sirocco, Apollo, and Fusion chaise backs adjust to flat position to make a sun bench |
| 13. |
Seat bed high enough to allow for easier seating and rising |
| 14. |
Powder coated stainless steel bolts and nuts prevent rusting |
| 15. |
Four-position, 1/2" thick cast aluminum ratchet (Sirocco uses a hidden catch hook assembly) |
| 16. |
Nylon bumpers or vinyl strap for added frame protection when stacking |
|
| |
Sirocco and Apollo: stacks up to 8 chaises
Roma Strap / Sling and Marathon: stacks up to 4 chaises
Delta: stacks up to 5 chaises (sled base -7100 stacks 4)
Solano and Fusion: stacks up to 6 chaises |
|
|
| |
 |
|
| |
| Features: Cushion |
|
|
The superior tailoring and design of a BROWN JORDAN cushion ensures that our furniture achieves the look and feel of casual elegance you expect from quality outdoor furniture.
- All components are designed and developed to meet Brown Jordan’s signature seating specifications
- Industry-best, zippered, water resistant cushion wrap repels water
- Indoor / residential foam provides same comfort levels as fine residential upholstered furniture
- Sits with down-like comfort
- Depending on the design style, some cushions feature additional fill for crown / shape
- Breathability allows for long lasting comfort and quick recovery
- No more standing on end to drain
|
| |
 |
|
| |
| Features: Powder Coating Process |
|
|
Buff and Grind
Fabricated, welded frames are prepared for final processing via a tedious, hand process where welded joints are ground to achieve uniform dimensions and the beginning of an aesthetically pleasing visual appearance. The frames are then sanded, buffed and polished to achieve a superior surface, allowing for better adhesion of the top / powder coat.
Five-Stage Chemical Pre-Treatment:
Detergent Wash and Clean Water Rinse: The frames are washed in a chemical solution bath to remove any particles remaining from the buff and grind process, as well as any oil residue.
Chromo-coat: The Chromo-coat solution serves two critical purposes: as a sealant and a bonding agent. When viewed under microscope, aluminum is porous. Chromate seals the microscopic fissures, clefts, cracks, or slits that naturally occur in aluminum.
Chromo-coat also leaves a strong bonding agent for the Ultra Fuse™ powder coating. The bonding agent prevents the coating from flaking, peeling or blistering over time.
Final Wash, Rinse, and Heated Dry
After the second solution bath, the frame is rinsed in cold water. This rinse removes any remaining chemicals. The frame is then subject to a heating process to dry.
Hybrid Base Coat Primer Sealant
The hybrid Primer sealant is an epoxy / polyester blend that treats the metal or frame before it receives its finish coat. The advantage of introducing the Primer is to achieve the highest level of anti-corrosion control, as well to promote superior adhesion of the powder coat.
The epoxy portion of the hybrid blend is a superior bonding agent that is specially formulated to adhere to metal. During the final cure, the coat will not reflow resulting in a harder topcoat surface. This harder surface protects the metal from corrosion. While the epoxy coat does not reflow in curing, the polyester portion of the hybrid blend does. The outcome is an advanced, integrated bonding that acts two-fold: while the epoxy grabs to the metal, the polyester grabs the top / final powder coat for an absolute superior resistance to paint delaminating. This ‘cross link’ of the primer and top coat also lends itself to improved color –and –gloss retention.
The Primer coat, by itself, achieves in excess of 4,000 hours of salt spray resistance, far exceeding that of the AAMA’s requirement. Therefore, with the introduction of the hybrid Primer, Brown Jordan furniture now achieves even longer salt spray resistance.
Powder Coating
The powder coat finish is applied to the frame surface by an electrostatic technique. The electrostatic process allows for a complete and uniform surface coating throughout all areas of the frame, including the bends and corners of the frame. The result is an attractive, durable, high-quality finish.
|
|
| |
|
 |
|
